CPE-135A
CPE-135A
Chlorinated polyethylene ke lintho tse entsoeng ka polymer e tletseng, ponahalo ke phofo e tšoeu, ha e na chefo ebile ha e latsoehe, e na le khanyetso e ntle ea boemo ba leholimo, khanyetso ea ozone, khanyetso ea lik'hemik'hale le botsofali, 'me e na le khanyetso e ntle ea oli, ho lieha ha lelakabe le ts'ebetso ea mebala.Matla a matle (a ntse a tenyetseha ho -30C), ho lumellana hantle le lisebelisoa tse ling tsa polymer, le mocheso o phahameng oa ho bola.
CPE-135A e na le hoo e batlang e se na likristale 'me e na le ts'ebetso e babatsehang ea ho thibela lelakabe, ho kenya motlakase, ho hanyetsa lik'hemik'hale, ho hanyetsa oli le ho thibela metsi;e lumellana hantle le PVC, Cr, NBR, joalo-joalo E ka boela ea sebelisoa e le sekontiri sa mollo bakeng sa lihlahisoa tsa ABS, terata le lisebelisoa tsa motlakase, lisebelisoa tse bonolo tsa PVC tsa foam, li-modifiers bakeng sa liraba tse khethehileng tsa maiketsetso, li-rabara tsa maiketsetso tse akaretsang, le li-plasticizers bakeng sa PVC. le lipolasetiki tse ling.Ha ho bapisoa le polyethylene e tloaelehileng ea chlorine 'marakeng, Bontecn chlorinated polyethylene e na le litšobotsi tsa mocheso o tlase oa phetoho ea khalase, ts'ebetso e phahameng ea ts'ebetso le bolelele bo phahameng nakong ea khefu.Ke mofuta oa rabara e khethehileng ea boleng bo holimo, ea boleng bo holimo.E ka sebelisoa e le mong kapa e kopane le rabara ea ethylene-propylene, rabara ea butadiene-propylene le rabara ea chlorostyrene ho hlahisa lihlahisoa tsa rabara.Lihlahisoa tse hlahisoang li na le bophelo bo bolelele ba ts'ebeletso ebile li hanyetsana le UV.Ho sa tsotellehe hore na tikoloho le boemo ba leholimo li thata hakae, li ka boloka thepa ea tlhaho ea rabara ka nako e telele.
| paramethara | unit | Tekanyetso ea teko | CPE-135A |
| Ponahalo | —- | Tlhahlobo ea pono | Phofo e tšoeu |
| Likahare tsa chlorine | % | —- | 35±2 |
| bokaholimo ba bokaholimo | g/cm³ | GB/T 1636-2008 | 0.50±0.10 |
| Masala a sieve (0.9mm mesh) | % | RK/PG-05-001 | ≤0.2 |
| E feto-fetohang | % | RK/PG-05-003 | ≤0.4 |
| E setseng (750℃) | % | GB/T 9345-2008 | ≤5.0 |
| matla a tšepe | MPa | GB/T 528-2009 | 8-13 |
| Elongation nakong ya khefu | % | GB/T 528-2009 | ~800 |
| Hardness Shore A | —- | GB/T 531-2008 | ≤65 |
1. Elongation e babatsehang nakong ea khefu le phofshoana e babatsehang ea phofo;
2. Fana ka lihlahisoa tsa PVC tse thata;
3,Bothata bo fetisisang le matla a tsitsitseng;
CPE135A e na le ho lieha ha lelakabe le ts'ebetso e ntle haholo, e ka eketsa ho tiea le matla a ts'usumetso ea PVC, 'me e ka sebelisoa haholo lihlahisoa tse thata tsa PVC tse kang litlaleho tsa PVC, liphaephe le lisebelisoa, lipoleiti, lithapo, joalo-joalo.
